Filter
Top Products
3.5.5.1 LAN Setting
To configure the LAN interface, click on the LAN Setting link in the left navigation
bar, show as below.
The Dynamic Host Configuration Protocol (DHCP) Server gives out IP addresses
when a device is booting up and request an IP to be logged on to the network. It must be
set as a DHCP client to obtain the IP address automatically.
Note: By factory default, the DHCP is disabled, VC-200M’s default LAN IP address
is 192.168.1.100, and VC-200S is 192.168.1.200.
The screen contains the following details:
Filed Description
IP Address Enter the LAN interface IP Address of
VC-200M/VC-200S
Subnet Mask Enter the LAN Subnet Mask of VC-200M/VC-200S
The Gateway acts as
DHCP Server
Enable or disables the DHCP Server of the of
VC-200M/VC-200S.
Select the check-box to enable this option.
IP Pool Starting
Address
Enter the starting IP Address of the DHCP server.(When
Enable DHCP Server)
37