Filter
Top Products
The screen contains the following details:
Filed Description
Enable UPnP To enable or disable UPnP Setting. Select the check box to
Enable or Disable the UPnP function of VC-200M/VC-200S.
z Click “CANCEL” to exit from this page without saving the changes.
z Click “APPLY” at any time during configure to save the information that you
have been entered.
Chapter 4 Operating the VDSL2 System
4.1 Configuration Settings
Configure and start the VC-200M and the CPE.
z Configuration: As a minimum configuration, usually selecting the profile is
required. See Chapter 4.1.3, Profile Configuration
z Next, both sides should be activated from the Web UI.
See Chapter 4.1.4, Line Activation
z The connection status of the link can be monitored.
See Chapter 4.1.5, Channel Status
46