Filter
Top Products
SIP Voice Gateway User’s Manual
Command Line Interface
55
Syntax description
hunt_group_id
ID of the hunt group to be displayed.
atpm hlist
The atpm hlist display all entries in the hunt group table.
Syntax description
This command has no arguments or keywords
Example
ITG>atpm hlist
Group id Type #Members Member ids
-------------------------------------------------------------------
1 2 1 1
2 2 1 2
3 2 1 3
4 2 1 4
5 2 1 5
6 2 1 6
7 2 1 7
8 2 1 8
11 2 1 11
OK
ITG>
Address Table Management Commands
atpm aadd
tel#
min_digits max_digits hunt_group_id prefix_strip_len
[
prefix#
]
Use the atpm aadd command to add an entry into the atpm address table.
Syntax description
tel#
Telephone number to match. This is only part of the total dialed string.
min_digits
Minimum number of digits to be collected before the ATPM starting
matching the dialed string with entries in the address table.
max_digits
Maximum number of digits to be collected before the ATPM starting
matching the dialed string with entries in the address table.
hunt_group_id
Hung group ID for this telephone number
pre-
fix_strip_len
The number of digits to be stripped at the beginning of the collected dial
string before forwarding the string to the destination.
prefix#
(Optional) Digit to be added before the beginning of the collected dial
string before forwarding it to the destination.