VIP-2100 User’s manual - 58 -
Figure 7.3-2
Advance Parameter Description:
• Interface ID: System parameter
• Trunk ID: System parameter
• Src Num Plan: ISDN source number plan
• Dest Num Plan: ISDN destination number plan
• Src Num Type: ISDN source number type
• Dest Num Type: ISDN destination number type
• Src Num Presen: ISDN source number presentation
• Src Num Screen: ISDN source number display
• Input Gain: Voice Gain from IP to PSTN side (default: 0 db)
• Output Gain: Voice Gain from PSTN to IP side (default: 0 db)
• Q.931 General Opt.: used for Q.931 general behavior.
o 0x0001: No Status message send for unknown facility IE if it is set
o 0x0002: No Status message send for invalid content of a valid
facility IE if it is set
o 0x0080: Send Connect Ack message when receive Connect
message if it is set, you can OR the required option together
• Q.931 Incoming Opt.: used for Q.931 incoming call behavior
o 0x0800: include Channel-ID IE in the first reply message (e.g. Call
Proceeding or Alerting)
o 0x2000: enable the system to include Channel-ID IE in the Call
Proceeding message, you can OR the required option together
• Q.931 Outgoing Opt.: used for Q.931 outgoing behavior
o 0x0010: use Mu-law if this bit is set, or A-law will be used. Apply
only for Korea variance, you can OR the required option together
• Trans Cap: Transfer Capability
o Voice Service
o Data Service
o Modem Service
• CallID Transfer Type: Call ID transfer type
o Disable Caller ID: default parameter
o Transparent Caller ID
o Relay Caller ID
o Bypass Caller ID