Filter
Top Products
34
Data - Advanced Settings Screen
Basic Rate
Basic Rate
The Basic Rate is used for broadcasting. It does not
determine the data transmission rate, which is determined
by the "Mode" setting on the Basic screen.
Select the desired option.
Do NOT select the "802.11g" or "ODFM" options unless
ALL of your wireless clients support this. 802.11b clients
will not be able to connect to the WAP-4060PE if either of
these modes is selected.
Options
Wireless Separation
If enabled, each Wireless station using the WAP-4060PE
is invisible to other Wireless stations. In most business
situations, this setting should be Disabled.
Worldwide Mode
(802.11d)
Enable this setting if you want to use this mode, and your
Wireless stations also support this mode.
Parameters
Disassociated Time-
out
This determines how quickly a Wireless Station will be
considered "Disassociated" with this AP, when no traffic is
received. Enter the desired time period.
Fragmentation
Enter the preferred setting between 256 and 2346. Nor-
mally, this can be left at the default value.
Beacon Interval
Enter the preferred setting between 20 and 1000. Nor-
mally, this can be left at the default value.