Filter
Top Products
63
Data - Config File Screen
Backup
Save a copy of
current settings
Once you have the WAP-4060PE working properly, you
should back up the settings to a file on your computer. You
can later restore the settings from this file, if necessary.
To create a backup file of the current settings:
· Click Back Up.
· If you don't have your browser set up to save
downloaded files automatically, locate where you want
to save the file, rename it if you like, and click Save.
Restore
Restore saved
settings from a file
To restore settings from a backup file:
1. Click Browse.
2. Locate and select the previously saved backup file.
3. Click Restore
Defaults
Revert to factory
default settings
To erase the current settings and restore the original factory
default settings, click Set to Defaults button.
Note:
· This will terminate the current connection. The WAP-
4060PE will be unavailable until it has restarted.
· By default, the WAP-4060PE will act as a DHCP client,
and automatically obtain an IP address. You will need to
determine its new IP address in order to re-connect.