Filter
Top Products
24
Parameter Description
Set Time Zone Select the time zone of the country you are currently in.
The router will set its time based on your selection.
Time Server Address
You can manually assign time server address if the
default time server does not work.
Enable Daylight Savings The router can also take Daylight savings into account. If
you wish to use this function, you must check/tick the
enable box to enable your daylight saving configuration
(below).
Start Daylight Savings Time Select the period in which you wish to start daylight
Savings Time.
End Daylight Savings Time Select the period in which you wish to end daylight
Savings Time.
Click <Save> at the bottom of the screen to save the above configurations and press “Apply and
Reboot” to apply the configuration and reboot the XRT-D router. You can now configure other
advance sections or start using the router (with the advance settings in place).
3.1.2 Password Settings
You can change the password required to log into XRT-D's system web-based management. By
default, the password is “1234”. So please assign a password to the Administrator as soon as
possible, and store it in a safe place. Passwords can contain 0 to 30 alphanumeric characters,
and are case sensitive.
Parameters Description
Current Password Enter your current password for the remote management
administrator to login to your Broadband router.
Note: By default the password is “1234”.
New Password Enter your new password