Filter
Top Products
English 12
4
Secure the film with the two magnets provided, on the top
and bottom edges. Be sure the magnets are also within the
raised ridges.
5
Place the adapter in the 4x5 carrier, sliding the notches into
the pins on the left edge. The film and magnets should be
face up, as shown.
6
Close the carrier. Squeeze the carrier at the bottom edge and
turn the knob to lock it.
The Single-35mm Carrier
1
Open the 4x5 carrier as described previously.
2
Locate the single-35mm adapter.
Note:
You can use a negative, or a mounted or unmounted
slide.
3
Orient the adapter so the metal tabs face up, and the notches
are at the left edge. Slide the film into the channel, under the
two metal tabs. Position the film so the image is right-
reading and right-side up.
LOCK
UNLOCK