Filter
Top Products
26
Cleaning the printer
Wipe the surface with a damp cloth.
Do not use aromatic solvents such as
acetone, MEK, strong detergent solu-
tions, or abrasives of any sort.
Loading a partially
used pack
If you load a partially used pack, the
printer assumes a full pack is loaded
and the software gives you an incor-
rect picture count. Keep track of the
number of exposures manually.
Note: The top frame acts as a film
cover. It will be ejected when you initi-
ate your first print command.
2 Turn the rollers with one hand. With
the other hand, use a clean, lint-free
tissue to wipe the full length of the
steel rollers located just inside the
door. Use a damp cloth if necessary,
then wipe the rollers dry.
TROUBLESHOOTING (CONT.)