Polycom 2300 Switch User Manual


 
Nortel: WLAN Security Switch 2300 Series with AP-2330
PN: 1725-36082-001_F.doc
3
Introduction
Polycom’s Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink 8000 Wireless Telephones and
wireless LAN (WLAN) infrastructure products. The products listed
below have been thoroughly tested in Polycom’s lab and have passed
VIEW Certification. This document details how to configure the
Nortel WLAN Security Switch 2300 Series and WLAN AP-
2330/2330A/2330B with SpectraLink 8000 Wireless Telephones.
Certified Product Summary
Manufacturer: Nortel: www.nortel.com
WLAN Security Switches Access points Approved products:
2380
2361
2360
2350
2330
2330A
2330B
Security: WPA-PSK and WPA2-PSK
2300 software version tested: Release 5.0.11.4
SpectraLink handset models tested: e340/h340/i640 8020/8030
SpectraLink handset software tested: 89.119 122.010 or greater
SpectraLink radio mode: 802.11b 802.11b 802.11a
Maximum telephone calls per AP: 10 10 12 *
Recommended network topology: Switched Ethernet (required)
Denotes products directly used in Certification testing.
* Maximum calls tested during VIEW Certification. The certified product may actually support a higher
number of maximum calls for 802.11a radio modes.
Service Information
The access point (AP) must support SpectraLink Voice Priority
(SVP). Contact your AP vendor if you need to upgrade the AP
software.