Polycom 2300 Switch User Manual


 
Configuration Guide
PN: 1725-36082-001_F.doc
38
set vlan 2 port 8 tag 2
set igmp disable vlan Voice
set interface 1 ip 192.168.1.50 255.255.255.0
set security acl ip SpectraLink permit cos 7 119 0.0.0.0
255.255.255.255 0.0.0.0 255.255.255.255
set security acl ip SpectraLink permit 0.0.0.0
255.255.255.255
commit security acl SpectraLink
set security acl map SpectraLink vlan Voice in
set security acl map SpectraLink vlan Voice out
The following configuration file provides an example configuration to
support SpectraLink 8000 Wireless Telephones using WPA2-PSK:
# Configuration nvgen'd at 2007-7-26 22:53:41
# Image 5.0.11.4.0
# Model 2360
# Last change occurred at 2007-7-26 22:53:34
set ip route default 192.168.1.1 1
set system name WSS2360
set system ip-address 192.168.1.50
set system countrycode US
set timezone EST -5 0
set service-profile Voice ssid-name Voice
set service-profile Voice auth-fallthru last-resort
set service-profile Voice rsn-ie enable
set service-profile Voice cipher-tkip disable
set service-profile Voice cipher-ccmp enable
set service-profile Voice psk-phrase enter-a-passphrase
set service-profile Voice auth-psk enable
set service-profile Voice auth-dot1x disable
set service-profile Voice attr vlan-name Voice
set enablepass password enable-password
set user admin password admin-password
set radio-profile default service-profile Voice
set radio-profile default dtim-interval 3
set radio-profile default auto-tune channel-config
disable
set radio-profile default active-scan disable
set radio-profile default qos-mode svp
set dap 1 serial-id stpw20kc3 model 2330
set dap 1 name WAP-2330-2
set dap 1 radio 1 channel 11 tx-power 10 mode enable
set dap 1 radio 2 channel 40 tx-power 10 mode enable
set port type ap 1 model 2330 poe enable