Filter
Top Products
User’s Guide for the Polycom RealPresence Group Series and the Polycom Touch Control
Polycom, Inc. 14
Showing Content with People+Content IP
The People+Content IP application allows you to send content from a computer that is not connected
directly to the RealPresence Group system or the Polycom Touch Control.
To start showing content:
1 On your computer, start the Polycom People+Content IP application.
2 Enter the IP address or host name of the RealPresence Group system and the meeting password, if
one is set.
To view the IP address of the RealPresence Group system, touch and then touch the
RealPresence Group Series System tab from the Home screen. Then under the RealPresence
Group Series System heading, scroll down to IP Address.
3 On the computer, click Connect.
4 In People+Content IP, open the content you want to show, and click .
To stop showing content:
1 If the People+Content IP toolbar is minimized, maximize it by clicking the icon in the task bar.
2 Click in People+Content IP.
3 Click Disconnect.
Showing Content from a Computer Connected to RealPresence Group
Systems
To start showing content:
1 From the Home screen or Call screen, touch Show Content.
2 Touch the video source to start showing content. Touch it again to stop showing content.
To stop showing content:
» From the Content screen, touch the computer source to stop showing it.
For a computer connected directly to the RealPresence Group system, Polycom recommends using
the Send Computer button or Content button instead of People+Content IP.
Points to note about showing content:
• Audio from the content input is muted unless the content input is selected as a
video source.
• If both digital and analog inputs are connected, only the digital content is sent. To
send analog content, disconnect both digital and analog inputs, wait 15 seconds,
then connect only the analog input.