![](http://pdfasset.owneriq.net/a/0f/a0f13427-1bdc-4e22-913f-850b1ac18670/a0f13427-1bdc-4e22-913f-850b1ac18670-bg11.png)
Polycom RMX 4000 Hardware Guide
1-11
Make sure that boxes contain all the required parts.
4 Remove the boxes and top Stratocell®.
5 Holding the handle on each side, lift the RMX 4000 from the box, and
place it on a flat surface or install it in a rack. Remove any packaging
material prior to positioning the RMX 4000.
Attention:
Two people are required to lift the MCU out of the box and when installing it in a
rack.