![](http://pdfasset.owneriq.net/b/1f/b1fe9376-2cd3-4ffe-ba65-9444ea740da3/b1fe9376-2cd3-4ffe-ba65-9444ea740da3-bg10.png)
Chapter 1- Hardware Description
1-10
Make sure that boxes contain all the required parts.
4 Remove the boxes and top Stratocell®.
5 Holding the handle on each side, lift the RMX 4000 from the box, and
place it on a flat surface or install it in a rack. Remove any packaging
material prior to positioning the RMX 4000.
Attention:
Two people are required to lift the MCU out of the box and when installing it in a
rack.