Filter
Top Products
Chapter 2-First Time Installation and Configuration
2-18
Connecting Cables on the RMX 4000
To connect the cables (AC and DC systems):
• RTM-IP 4000:
— Connect the Management Network cable to LAN 2.
— Connect the Signalling cable to LAN 3.
— Connect the Shelf Management cable to LAN 6.
•For each installed RTM LAN - Connect the LAN cable to LAN 2.
•For each installed RTM ISDN:
— Connect the E1/T1 cables to their PRI Ports.
— Connect the LAN cable to LAN 1.
Figure 2-3 RMX 4000 Rear Panel View with AC Power and Communication
Cables
LAN Connections to RTM LAN
Power Cables
Off/On
switch
E1/T1 Connection to RTM ISDN
Shelf
Manage-
ment
Management
Network
Signalling
Network