Filter
Top Products
Chapter 2-First Time Installation and Configuration
2-40
These flags can be modified later, if required, by selecting the System
Configuration option from the Setup menu. For more information, see
the RMX 1500/2000/4000 Administrator’s Guide, ”System Configuration”
on page 18-5.
33 Click Save & Close.
The RMX confirms successful configuration.
34 In the Success Message box, click OK.
35 In the Reset Confirmation dialog box, click Yes.
36 In the Please wait for system reset message box, click OK.
37 Refresh the browser periodically until the Login screen is displayed.
38 When the Login screen is displayed, enter your Username and
Password and click Login.
Terminate
Conference
when
Chairperson
Exits
When Yes is selected (default), the conference ends
when the chairperson exits even if
there are other
participants connected.
When No is selected, the conference automatically ends
at the predefined end time, or when all the participants
have disconnected from the conference.
Auto Extend
Conferences
When Yes is selected (default), allows conferences
running on the RMX to be automatically extended as long
as there are participants connected and there are
available resources.
The maximum extension time allowed by the MCU is 30
minutes.
Table 2-13 Fast Configuration Wizard – System Flags (Continued)
Field Description / Default
System restart may take up to five minutes.