Filter
Top Products
Part 7
US LF <1F><0A> Move Cursor Up
US CR <1F><0D> Move Cursor To Right Most Position
US $ <1F><24><n><m>
Move Cursor To Specified Position
n = 1 ~ 20
m = 1, 2
US @ <1F><40> Show Version
US B <1F><42> Move Cursor To Bottom Position
US C <1F><43><n> Cursor On / Off, n = 1, 0
US E <1F><45><n>
Blink Display Screen
n = 0 ~ 255
PST COMMAND MODE:
HEX CODE FUNCTION
<01> Set Pass Through Flag (should not be used)
<06> <N
1
> <N
2
> Change Leading Code
<14> <01> Wraparound Mode (Default)
<14> <02> Vertical Scroll Mode
<14> <03> Insert Mode
<14> <04> Overwrite Mode (Default)
<14> <08> Back Space
<14> <09> Move Cursor Right
<14> <0A> Move Cursor Down
<14> <0B> Move Cursor Left
<14> <0C> Delete Character
<14> <0D> Move Cursor To Left Most Position
<14> <0E> Clear Display
<14> <10> Clear Line 1
<14> <11> Clear Line 2
<14> <12> Cursor Block Mode
<14> <13> Cursor Under Line Mode
<14> <15> <02> Clear Pass Through Flag
<14> <16> Switch To Epson Mode
<14> <17> Cursor On
<14> <18> Cursor Off
<14> <19> Reset
<14> <1A> <P> Move Cursor To Position P (P=0~13,14~27h)
<14> <1B> Move Cursor To Rightmost Position Of Line 1
<14> <1C> Move Cursor To Rightmost Position Of Line 2
The power on default of the PD302 itself is the Epson command mode.
The Euro Dollar Sign is designated at code <D5>h.