Filter
Top Products
EATON Powerware
®
9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B
www.powerware.com
15
Chapter 3 Installation
This section explains:
S Equipment inspection
S UPS setup and installation
S Extended Battery Module (EBM) installation
S Remote emergency power-off (REPO) installation
Inspecting the Equipment
If any equipment has been damaged during shipment, keep the shipping
cartons and packing materials for the carrier or place of purchase and file
a claim for shipping damage. If you discover damage after acceptance,
file a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with
the carrier within 15 days of receipt of the equipment; 2) Send a copy of
the damage claim within 15 days to your service representative.
NOTE Check the battery recharge date on the shipping carton label. If the date has expired
and the batteries were never recharged, do not use the UPS. Contact your service
representative.
NOTE Inspect the battery trays for any loose connections. If any damage occurred during
shipment, file a shipping claim a s stated above.
UPS Setup
The Powerware 9125 UPS is designed for flexible configurations and can
be installed in a rack or as a standalone cabinet.
For rack-mounted installations, follow the instructions with the rail kit
before installing the internal batteries.
For standalone installations, continue to “Installing the UPS Internal
Batteries” on page 16 to begin the UPS setup.