Filter
Top Products
ADDITIONAL UPS FEATURES
EATON Powerware
®
9135 Two−in−One UPS (5000/6000 VA) User’s Guide S 164201726 Rev 1
www.powerware.com
60
Network Management Card (Optional)
It is not necessary to shut down the UPS before installing a
communication card.
1. Remove the slot cover secured by two screws.
2. Insert the communication card into the slot.
3. Secure the card with both screws.
BATT. NO.RPO
CONTACTSRS−232
DO NOT DISCONNECT
UNDER LOAD
BATTERY CABLE
CAUTION:
CONNECTOR
180Vdc
GROUP 1
SWITCHED
BATTERY
Communication Card
(restricted access)
Figure 37. Network Management Card (EU Model Shown)