Filter
Top Products
Installation
25
Powerware
®
5115 Rack-Mount User’s Guide : 164201449 RevA www.powerware.com
Zero-U Mounting
Use the following procedure to install the UPS in a zero-U rack
configuration:
1. Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
2. Attach four mounting brackets to the UPS as shown Figure 9.
Secure the short end of the mounting bracket to the UPS using
two of the supplied M3
l 6 screws.
3. Adjust the sides of the rack to fit the UPS and brackets (within
22.54–22.78” or 56.35–56.95 cm).
4. Secure the UPS to the side of the rack cabinet using one
M6
l 10 screw and one clip nut in each mounting bracket.
Side of Rack Cabinet
(within 22.54–22.78”
or 56.35–56.95 cm)
Figure 9. Zero-U Mounting