Filter
Top Products
Configuration
32
Powerware
®
9125 Two-in-One (5000/6000 VA) PDM User’s Guide S Rev B www.powerware.com
3. Press the button ONCE to toggle the selected option on or
off.
Repeat Steps 2 and 3 for each option. Scrolling past the last LED
returns to the first configuration option.
NOTE The UPS exits Configuration mode automatically after two
minutes of inactivity.
4. Press the On button and the button simultaneously for
three seconds to exit Configuration mode at any time.
1
Press the On and Test/Alarm Reset
buttons simultaneously to toggle
between Configuration and Operation
mode.
& 4
Press the Test/Alarm
Reset button t o toggle an
option on or off.
3
Press the On button to
scroll to the next
option.
2
On Button
Test/Alarm
Reset Button
Bar Graph Indicators
Figure 19. Using the Configuration Mode