Filter
Top Products
Installation
13
Powerware
®
9125 Two-in-One (5000/6000 VA) PDM User’s Guide S Rev B www.powerware.com
4. Install the UPS front panels (provided in the accessory kit).
Figure 3. Installing the Front Panels
5. If you are installing the UPS as a standalone cabinet or in a
tower configuration, continue to the following section, “Tower
Setup.”
If the UPS is in a rack and you are installing an optional
Extended Battery Module (EBM), continue to “EBM Installation”
on page 16; otherwise, continue to “Plug-Receptacle PDM
Installation” on page 17 or “Hardwired PDM Installation” on
page 23.