Filter
Top Products
Technical Specifications
7-1
Forms
Compatibility
Overall Forms Width ...................................................................... 8.75 inch (222 mm)
Internal Roll Capacity................................................... 2.6 inch (66 mm) diameter roll
For 840DL/G and 820DL/G:
Bottom Feed Roll Capacity.....................................5 inch (152 mm) diameter roll
Bottom Feed Fan-fold Capacity............................. 18 inch (457 mm) stack height
Forms Mark ............................................ See Section 3-3 for forms mark specifications
Environmental
Storage Temperature ....................................................... -40
o
C (-40
o
F) to 60
o
C (140
o
F)
Operating Temperature (non-condensing) ......................... 5
o
C (41
o
F) to 40
o
C (104
o
F)
Shock & Vibration (non-operational) ........................................ 3G, 0 to 50 Hz, 3 axes
Environmental Ingress (IEC 529) ............................................................................. IP54
General
Specifications
Power Requirements (840DL/G) ............................... 100-240 VAC, 500 VA, 50~60Hz
Power Requirements (820DL/G and 820G) .............. 100-240 VAC, 240 VA, 50~60Hz
Power Requirements (810) ........................................ 100-240 VAC, 150 VA, 50~60Hz
Height ................................................................................................4.5 inch (114 mm)
Width .............................................................................................. 12.2 inch (310 mm)
Depth .............................................................................................. 12.4 inch (315 mm)
Unit Weight.............................................................................................. 14 lbs (6.4 kg)
Shipping Weight ...................................................................................... 18 lbs (8.2 kg)
Interface ...........................................................................................High Speed Parallel
Performance
Print Speed (840DL/G) ........................................................................ 0.5 to 4 inch/sec
Print Speed (820DL/G and 820G) ....................................................... 0.5 to 2 inch/sec
Print Speed (810) ................................................................................. 0.5 to 1 inch/sec
Horizontal Resolution .................................................................... 203 dpi (8 dots/mm)
Vertical Resolution .........................................................................203 dpi (8 dots/mm)
Regulatory
CE ............................................................................................... ITE Directive, Edition 2
FCC ...................................................................................................................... Class A
Information in this document is subject to change without notice and does not represent a commitment on the part of
Printrex, Inc. No part of this manual may be reproduced or transmitted in any form or by any means, for any purpose other
than the purchaser’s personal use, without the expressed written permission of Printrex, Inc.
All rights reserved. Printed in the United States of America.
© Copyright 2003 by Printrex, Inc.
Part Number: 1028-0071 Rev 1
Printrex
• 276 East Gish Road • San Jose, CA 95112-4703 • Ph: (408) 573-1200 • Fax: (408) 573-1600 • www.printrex.com