Filter
Top Products
Step 4: Install Drivers
9
Step 4: Install Drivers
• Make a Driver Installation Diskette (Windows), below
• Windows Server 2003
• New, page 10
• Exsting, page 10
• Confirm, page 11
•Windows XP
• New, page 11
• Exsting, page 12
• Confirm, page 12
• Windows 2000
• New, page 12
• Exsting, page 13
• Confirm, page 14
• RedHat Linux
• New, page 14
• Exsting, page 15
• SuSE Linux
• New, page 15
• Exsting, page 16
Following are driver installation procedures for the Windows operating systems
that support the SATAII150 and SATA300 TX Series Serial ATA Controller cards.
The drivers for Windows are included on the CD.
Drivers and installation instructions for Linux operating systems are
downloadable from the Promise website at www.promise.com.
Make an Installation Floppy Diskette (Windows)
This procedure requires one write-enabled blank 3.5-inch diskette.
4. Place your blank diskette in the appropriate drive.
5. Insert the Promise CD into your CD-ROM drive.
The display screen should open automatically.
If the display screen does not open, click on MyComputer > CD Drive D: and
double-click on the Launch.exe icon.
6. Click on the Windows Driver button.
The Disk Copy Utility opens.