Filter
Top Products
PROMISE Technology
All rail ends, front and rear, attach at the outside of the rack posts.
The guide pins at the rail ends align with the holes in the rack posts.
Use the attaching screws and flange nuts from your rack system. Tighten the screws and nuts
according to instructions for your rack system.
Figure 7: Rail ends attach to the outside of each post
R
ail ends attach on the
outside of the front and
rear rack posts
3.
Place the Vess onto the rails.
At least two persons are required to safely lift the system.
Lift the Vess itself. Do not lift the system by its brackets.
Figure 8: Placing the Vess system onto the rack rails
Brackets
Ves
s system
4.
Secure the Vess or to the rack.
Rails in
stalled
and tightened
The unit attaches to the rack posts using the included screws and flange nuts. One screw each
side, in the upper hole only.
Use the attaching screws and flange nuts that came with the Vess.
Figure 9: Secure to rack
Screws and flange
nuts attach the Vess
to the rack posts
8