Filter
Top Products
8
Checking the package Contents
Make sure all of the following items are included in the package. If anything is missing, please contact your
dealer.
• Use the remote control in front of the remote control photoreceptor at a distance
of about 5 m or less and an angle of 30 degrees to the left or right of the center.
Main unit
STANDBY / ON button
Press this button to turn the power on
and off. When turned off, the projector
enters standby status. Refer to page 13
- 14 for details.
MUTE button
This button turns the sound on and
off. Press once to turn the sound off;
then press again to turn the sound
back on.
ZOOM button
Used to adjust the size of the
image. (Refer to page 13.)
POWER indicator
This indicator lights or blinks during standby
and during operation. Refer to page 33 for
details.
TEMP indicator
Blinks when the fan malfunctions.
Refer to page 33 for details.
Remote control I/R receiver
Lens
Lens cap
Speaker
Cooling fan
(intake side)
Cooling fan
(exhaust side)
Carring handle
Projector unit Remote control
Remote control
Batteries
User’s Guide (this document)
Speaker
RESET button
Used to reset the initial settings.
Refer to page 10, 17, 25, 26 for details.
LAMP indicator
Lights or flashes when the temperature
inside the projector increases or the lamp
does not light. Refer to page 33 for details.
INPUT button
Press this button to switch the input. The input
changes in the following sequence each time
this button is pressed.
MENU button
Displays the image menu. Refer to page 17 -
21 for details.
FOCUS button
Used to adjust the focus of the image on the
screen. (Refer to page 13.)
RGB1 RGB2 VIDEO
Names and functions of each part
Power Cord × 3
110V-US
220-UK, Europe
3 - C o n d u c t o r
Video/Audio Cable
RGB Cable
(15-15 pin M/M)
Mac adapter
with dip switch
S-Video Cable
(S-Video mini Din4-pin)
Stereo mini jack
c a b l e
Mouse cable × 3