PSC 1400I Scanner User Manual


 
General Features
2-12 Magellan
®
1400i
Scanning Features
Aiming Pointer
This feature enables/disables the Aiming Pointer for all symbologies.
Targeted Scanning Mode
Upon pressing the button, the scanner will project an aiming pattern to assist in centering over
the bar code. Scanning then takes place as soon as the button is released.
Configuration options for Targeted Scanning Mode are:
Target Mode: Active Time
Target Mode: Linger Time
START / END
PROGRAMMING BAR CODES
Disable
DEFAULT
Enable always on
NOTE
When add-ons are enabled and a bar code is being read while in Targeted
Mode, position the pointer at or near the end of the base label to ensure
the scanner will read both the base and add-on label.
Targeted Scanning Mode will read bar codes in any orientation.
The scanner will return to full pattern Omni-directional Mode after either
of the following has ocurred:
- Good Read +
Target Mode: Linger Time has elapsed.
-
Target Mode: Active Time + Target Mode: Linger Time has elapsed.