PSC 1400I Scanner User Manual


 
Interface
Features
Product Reference Guide
3-35
Keyboard Wedge — cont.
Wedge Quiet Interval
Quiet Interval is the amount of time to look for keyboard activity before the scanner breaks the
keyboard connection in order to transmit data to the host.
NOTE
This feature does not apply to the USB Keyboard
interface.
START / END
PROGRAMMING BAR CODES
Selectable from 000 (no interval) to 255 in 10 msec increments. To configure this feature, scan the “START/END” bar code above to
place the unit in Programming Mode, then the
Set Wedge Quiet Interval bar code followed by the three digits (zero padded) from
the Alphanumeric table in
Appendix C, Alpha-Numeric Pad representing your desired length. Exit programming mode by again
scanning the “START/END” bar code above.
DEFAULT SETTING FOR THIS FEATURE:
010 (100 msec)
Set Wedge Quiet Interval