Filter
Top Products
Interface
Features
Product Reference Guide
3-11
RS-232 Interface Features — cont.
Hardware Flow Control
Disable Hardware Control—
The scanner transmits to the host regardless of any activity on
the CTS line.
Enable CTS Flow Control—
The CTS signal controls transmission of data to the host.
Enable CTS Scan Control—
The CTS line must be active for the scanner to read and trans-
mit data. While the CTS line is inactive, the scanner remains in a host-disabled state; following
a successful label transmission, the CTS signal must transition to inactive and then to active to
enable scanning for the next label.
START / END
PROGRAMMING BAR CODES
Disable Hardware Control
DEFAULT
Enable CTS Flow Control
Enable CTS Scan Control