Filter
Top Products
NE0154601-00 C 3-1
3 Quick Start
This section provides instructions for advanced users who are already familiar
with hardware and software installation procedures. See the appropriate section,
as applicable:
“QLogic Adapter Installation and Verification” on page 3-1
“Windows Server Driver Installation” on page 3-2
“Linux Driver Installation” on page 3-4
QLogic Adapter Installation and Verification
The following sections provide high-level instructions for installing the QLogic
adapter. For more detailed instructions, see “Hardware Installation” on page 4-1.
Pre-installation Checklist
Before installing the QLogic adapter:
1. Verify that the system meets the requirements specified in “System
Requirements” on page 2-1.
2. Power down the system.
QLogic Adapter Installation
To install the QLogic adapter:
1. Insert the QLogic adapter into an available PCI Express
®
slot.
2. Connect the appropriate cables to the QLogic adapter.
3. Power up the system.
For more information on the QLogic adapter installation, refer to “Hardware
Installation” on page 4-1.