Filter
Top Products
11
Running the iSCSI discovery session on different OS environments may vary. The following
example illustrates how to run an iSCSI discovery session on a Windows Server.
To run a discovery session on Windows Server:
a. Install an iSCSI initiator on your server. This can be either a dedicated iSCSI adapter or a
software initiator for Windows like the one available from www.microsoft.com
.
b. Invoke the software initiator, and then specify the IP address of the iSCSI port on your
iSR6200.
c. On the iSCSI Initiator Properties page, click the Targets tab (see Figure 8).
Figure 8. iSCSI Initiator Properties
4. Present LUNs to the iSCSI initiator as follows:
a. To refresh the SANsurfer iSCSI/FC Router Manager display, click Refresh.
The iSCSI initiator names should appear on the Information page for the selected Discovered
iSCSI Initiators (see Figure 9).