Q-Logic I S R 6 2 0 0 Network Router User Manual


 
8
The iSR6240 router blade (see Figure 5) adds two iSCSI Ethernet ports to the blade configuration.
Each port has the following capacity:
Auto negotiating transmission rates of 100 and 1000Mbps
Full duplex transmission mode
Support for jumbo frames (at 1000Mbps only)
RJ45 copper Ethernet connector type
iSCSI header and data digest in the hardware
IPv4 and IPv6 protocol support
iSCSI offload
Figure 5. iSCSI (GE) Ports on the iSR6240 Router Blade
The iSR6250 router blade (see Figure 6) adds two 10Gb Ethernet ports to the blade configuration.
Each port has the following capacity:
10GbE iSCSI ports that run in full duplex mode
Support for jumbo frames
IPv4 and IPv6 protocol support
iSCSI header and data digest in the software
Figure 6. 10Gb Ethernet Ports on the iSR6250 Router Blade
The iSR6260 router blade (see Figure 7) adds two more Fibre Channel ports to the blade configuration.
Each port has the following capacity:
Auto negotiating transmission rates of 2, 4, or 8Gb
Hot pluggable SFP Fibre Channel connector
N_Port, NL_Port, or transparent port type
Figure 7. Fibre Channel Ports on the iSR6260 Router Blade
For installation details, diagnostics, and troubleshooting, see the iSR6200 Intelligent Storage Router Installation Guide.
Activity
Link Status
SAN (Green)
LAN (Green)
8Gb (Yellow) 4Gb (Green) 2Gb (Amber)