Quantum DX Scanner User Manual


 
DX Scanner Basic Operation Instructions 5
Figure 1. Scanner Control Components and Connections
BACK OF MODULE
Drive Mode LED
Indicates if the Drive
Mode is powered on
or off.
Environmental Mode LED
Indicates if Environmental Mode
is powered on or off.
Direction LEDs
A set of 8 LEDs which
indicate drive direction
or function.
Select Switch Socket
Used to connect a switch that
can control all functions of
the Scanner.
DXBUS Socket
Used as an interface to connect
the DX Scanner to other DX
compatible controls.
Environmental Socket
Used to connect an environmental
control or communication device
to the Scanner.
T
M
Module Status LED
Indicates the status of the
Scanner; flashes when there
is a fault within the Scanner
(not the power chair).
Seating Status LED
Indicates if actuator control
is powered on or off.
Seating Mode LED
Indicates if Seating Mode
is powered on or off.