Filter
Top Products
3 Check the settings on the display
and press SET .
Setting Number of Seconds for External Time Signal
1 Press SELECT to cause
EXT. ALARM to light up.
2 Press or to adjust the
duration in seconds.
Example: To set for 30 seconds, set the
second indication at "30".
This function sets the duration of the external time signal. The setting is enabled only
when external time signal is set in the time table program.
• The duration is factory-set at 5 seconds.
• The EXT. ALARM button stays lit up during its setting operation.
For the number of seconds, 1
through 30 can be selected
DAY ADV.TIME D.S.T PROGRAM EXT.ALARM
SET
PAY ENDING
SELECT
YEAR
RED/BLK.
MONTH
EX.ALM
DAY
COL.
HOUR MINUTE SECOND/CARD
DATE/TIME
SU12Hr. TU SAFRTHWEMO
1/60
1/100
DAY ADV.TIME D.S.T PROGRAM EXT.ALARM
SET
PAY ENDING
SELECT
YEAR
RED/BLK.
MONTH
EX.ALM
DAY
COL.
HOUR MINUTE SECOND/CARD
DATE/TIME
SU12Hr. TU SAFRTHWEMO
1/60
1/100
25