Filter
Top Products
4. Complete the final steps of the installation, shut down Windows NT and then
insert the PCMCIA Card and re-boot the computer.
Additional help is available online
The SSP-200/300 PC Card should now be configured. In the future, Windows NT will
automatically recognize and configure the SSP-200/300.
Note: Windows NT does not support ‘Plug and Play’ for PCMCIA cards. The PCMCIA
Card must be inserted prior to starting Windows NT and can not be removed and
reinserted while Windows NT is running.
5-4 SSP-200/300 (Rev. I and later) User's Manual