Filter
Top Products
38
6. Use the number and decimal point keys to enter the Talk Group
ID:
For ED Talk Group IDs, you can enter either a decimal or AFS
code. The default setting is decimal ID entry.
To use the AFS code, press FUNC then 2, “AFS Format” appears
for about 2 seconds. You can then enter the AFS code.
If you make a mistake, “Invalid ID value” appears when you press
ENT. Go back to Step 3.
If you entered an ID that is already stored in same bank, “Dupl.
ID of X-XX appears.” To store the ID code, press ENT. To cancel,
press CL.
7. Press ENT.
For information about adding text tags to a Talk Group ID, see
“Text Tags” on Page 43.
Deleting Talk Group IDs
You can delete an individual Talk Group ID or all Talk Group IDs in a
bank.
To delete a Talk Group ID:
1. Press PROG then TRUNK.
2. Press FUNC, or to select ID memory.
3. Press FUNC then CL.
To delete ALL talk group IDs in a bank:
1. Press PROG.
2. Press TRUNK to enter a Talk Group ID memory mode.
3. Select a Talk Group ID bank using FUNC, or .
4. Press FUNC then 6. “Clear entire list? Press 1 to clear all, any
other key aborts” appears.