Filter
Top Products
43
6. Press
SRC
to begin
searching for the trunk’s
data channel (the channel
that controls the trunk).
SEARCH
flashes as the
scanner searches for the
data channel.
While the scanner looks through the frequencies,
you see them on the display. When the scanner
finds the data channel, it begins trunk tracking.
SCANNING A TRUNKED BANK
You can scan one trunked bank at a time. Once you
have stored frequencies for a trunked system in one or
more of the 5 available banks and you are scanning
conventional (non-trunked) frequencies, follow these
steps to begin trunk scanning.
1. Press
TRUNK
. The numbers for all banks flash,
along with
BANK
and
TRUNK
.
2. Use the number keys to enter the number for the
trunked bank you want to scan, then press
SRC
.
The scanner searches for a data channel. When
the scanner finds it, it begins trunk tracking.
If you entered all of the trunk’s frequencies, you
should be able to follow conversations between
broadcasters even when they change frequen-
cies. IDs, which represent different service
groups, appear.
3. To return to conventional scanning, press
TRUNK
again.
ID