Filter
Top Products
9
PREPARATION
POWER SOURCES
You can power your scanner from any of three sources:
• Internal batteries (not supplied)
• Standard AC power (using an optional AC adapter)
• Vehicle battery power (using an optional DC
adapter)
Using Internal Batteries
You can power your scanner using four AA batteries.
For the longest operation and best performance, we
recommend alkaline batteries (such as Cat. No. 23-
552).
You can also use four rechargeable nickel-cadmium
batteries (Cat. No. 23-125). Before you use nickel-cad-
mium batteries, you must charge them (see “Charging
Nickel-Cadmium Batteries” on Page 11).
Follow these steps to install batteries.
1. Turn
VOLUME/OFF
counterclockwise until it clicks
to make sure the power is turned off.
2. Slide up and hold the tab on the back of the scan-
ner, then pull up the battery compartment cover.