Filter
Top Products
51
Beyond the Basics
Or you can program all the talk group numbers for one fl eet
of an agency.
1. Enter the agency number.
2. Press ./CLR to enter the “dash”.
3. Enter the fl eet number.
4. Press E.
Remember the AFS format allows you to enter full or
partial EDACS IDs for powerful fl exibility in all modes. Be
sure to read the section “An EDACS Trunked System” to
learn how this works.
The scanner defaults to “AFS” talk group displays for
EDACS only.
LTR talk groups
To enter an LTR ID:
For a LTR ID, the area code, home repeater number and
ID make up the talk group ID.
See “LTR Tracking” for more
information.
1. Enter the area code.
2. Enter the home repeater number.
3. Enter the ID you want to store.
4. Press E.
To clear a stored ID while entering an ID, press 0 and E
successively, and start over.
receiving trunked systems
Before you start receiving trunked systems, you have to
properly program all the frequencies for a trunked system.
Note
Note
Notes
Notes