Filter
Top Products
35
REPLACING THE FUSES
The fuses in the scanner’s DC power
cord and DC cigarette-lighter power
cord help protect your scanner from
power surges and short circuits. If the
fuse in the DC power cord has blown,
replace it with a 1-amp, fast-acting
glass fuse (such as RadioShack Cat.
No. 270-1005). For the fuse in the DC
cigarette-lighter power cord, replace it
with a 2-amp, fast-acting glass fuse
(such as RadioShack Cat. No. 270-
1007).
Warnings:
• Before you begin, turn off the
scanner and your vehicle’s igni-
tion.
• Make sure you replace the fuse
only with another fuse of the same
type and rating.
Replacing the Fuse in the DC
Power Cord
1. Turn off the scanner and your
vehicle’s ignition.
2. To open the fuse holder, push the
fuse holder ends together, then
turn either end counterclockwise
and release it.
3. If the fuse is blown, replace it.
4. To close the fuse holder, push the
fuse holder ends together, then
turn either end clockwise.
Replacing the Fuse in the DC
Cigarette-Lighter Power Cord
1. Turn off the scanner and your
vehicle’s ignition.
2. To open the cigarette-lighter plug,
turn the cap counterclockwise and
remove it.
3. If the fuse is blown, replace it.
4. Replace the cap.
(add corrected illus F26,
deleting curved arrow)
20-147.fm Page 35 Tuesday, August 3, 1999 3:23 PM