Filter
Top Products
TCCI-1 • 7
We have included a copy of the RC-Plus shareware radio control program
on our HamBase demo diskette. This program will be found in the directory
\RCPLUS. To use the program, copy all the files in the directory to your hard
disk, or to a different disk by typing :
C:> MD RCPLUS
C:> CD RCPLUS
C:>COPY A:\RCPLUS\*.*
(If copying from A drive, type COPY B ....,
if copying from B drive, type COPY A ....)
To print the document type:
C:>\RCPLUS>PRINT RCPLUS>DOC
To run the program type:
C:>\RCPLUS>RCPLUS
F1 will give you outline help. ALT-S will allow you to specify your radio.
If you have trouble uderstanding the above, we suggest that you contact a
local computer user to help you.
TROUBLESHOOTING:
If the interface appears not to be working, here are some things to try:
❒ 1. If the interface controls the radio in any way rest assured that it is
operating correctly and a software bug is to blame.This means that the
cable is not at fault.
❒ 2. Check all connections for proper fit.
❒ 3. Check that the correct radio is selected in your software.
❒ 4.Check the serial port and it’s properties.
❒ 5. Check the radio parameters and DIP switches (if any).
❒ 6. Remove any TSRs that may conflict with your serial ports.
❒ 7.Try using a different serial port.
❒ 8. If you have more than two serial ports on your computer, check for
IRQ conflicts.