Filter
Top Products
30 DOMINION KX USER GUIDE
the same target server through the device. Click on the drop-down arrow to select one of
the following:
Private mode (default): No PC Share. Each target server can be accessed
exclusively by only one user at a time.
PC share mode: Target servers can be accessed by eight users (administrator or
non-administrator) at one time. If there is a remote user and a local user sharing the
target, control is based on first active keyboard/mouse input. However, if only
remote users are sharing targets, each remote user has equal keyboard and mouse
control. PC share timeout value is the idle time that is used to determine when a
remote user or local user can take control of the keyboard/mouse from the other.
Uneven control will happen if a user does not stop typing or moving the mouse.
Automatic color calibration for the session is based on the first connected user’s
settings; subsequent connected users may notice visual differences from their usual
calibration. The first user’s settings are the default settings for the duration of the
session.
Note: PC share mode is a global setting. For individual user access settings see Keyboard and
Mouse Control and Concurrent Access Mode on the User Account Settings screen. Each user
profile can be set individually to enable/disable keyboard and mouse control, and concurrent
access.
− Log out idle users: Click on the check box to automatically disconnect remote users
after a certain amount of inactive time has passed. Type the amount of time in the After
field.
Note: If you invoke KX Manager via the Admin channel in RRC, be aware that this timer can
affect your session. Launch KX Manager outside of RRC or disable this parameter for the
session to avoid having RRC’s user idle time logout your KX Manager session.
− Enable strong passwords: Requires user passwords to have a minimum of 6 characters
with at least one alphabetical character and one non-alphabetical character (punctuation
or number). The first four characters of the password and the username cannot match.
Strong password rules affect only those usernames and passwords stored by Dominion
KX. If you configure the device to authenticate to a remote server such as LDAP,
RADIUS, or Active Directory, these rules are not enforced by the device (please see the
section
Remote Authentication in this chapter for more information on remote
authentication).
− Enable multiple logins: When this rule is selected, a given username/password
combination can be connected into the device from multiple client workstations at a time.
− Password expiration time: Type a number of days in this field to force users to change
their passwords after a set duration.
− Private key: Type a private key password. Only those remote users who know the
private key, in addition to their own usernames and passwords, can log in and connect to
the device.
− Re-enter key: Type private key password again for confirmation. Remember that
passwords are case sensitive. Private key passwords must be alphanumeric; special
characters cannot be used.
− Local device reset mode: Determines how the local factory and password reset feature
in the OSD operates. Click on the drop down arrow to select one of the following:
Enable local factory reset (Default)
Enable local admin password reset
Disable all local resets
2. Click OK to set Security Configurations or click Cancel to close the window without saving
changes.