Raymarine M1500 Computer Monitor User Manual


 
i
M1500 Marine Monitor Preface
This handbook contains very important information on the installation and
operation of your new equipment. In order to obtain the best results in operation
and performance, please read this handbook thoroughly.
Raymarine’s Technical Services representatives or your local dealer will be
available to answer any questions you may have.
Important information
Intended Use
This display is intended to be used in a recreational marine environment. It can be
integrated as part of a marine navigation system and/or used within an entertainment
system.
Safety notices
WARNING:Product installation
This equipment must be installed and operated in accordance with the Raymarine
instructions provided. Failure to do so could result in poor product performance,
personal injury and/or damage to your boat.
WARNING: Electrical safety
Make sure you have switched off the power supply before you start installing this
product.
WARNING: High Voltage
The display unit contains high voltages. Adjustments require specialized service
procedures and tools only available to qualified service technicians – there are no
user serviceable parts or adjustments. The operator should never remove the display
unit cover or attempt to service the equipment.
WARNING: Navigation aid
When this display is used within a navigation system, it is only an aid to navigation.
Its accuracy can be affected by many factors, including equipment failure or defects,
environmental conditions, and improper handling or use. It is the user’s
responsibility to exercise common prudence and navigational judgements. This unit
should not be relied upon as a substitute for such prudence and judgement. Always
maintain a permanent watch so you can respond to situations as they develop.
CAUTIONS:
1. To disconnect the display from the ship’s supply isolate the power cable from the main
supply or remove the power connector from the rear of the monitor. Note that the ON/
OFF button at the front of the monitor changes the operating mode; it does not provide
complete protection in an emergency.
2. To avoid risk of electrical shocks, use only Raymarine specified cables.
3. To prevent damage caused by lightning or abnormal current peaks, disconnect the dis-
play from the power source during intense storms, or when it is not being used for long
periods of time.
4. Call a qualified service engineer if any of the following occur: