Filter
Top Products
EN
14
Cut
You can erase unwanted parts from
your recording.
1. Select folder.
2. Select file.
3. Start playback of
the file with the
unwanted part.
4. Press ERASE to
mark the start of
the unwanted part,
“CUT-S” shows on
display.
5. Press ERASE to
mark the endof the
unwanted part,
“CUT-E” shows on
display.
6. Press ERASE again to confirm
cutting (or press STOP to cancel)
7. “WAIT” will show on the display.
8. After the memory rearrangement
completed, the unit will go to STOP
mode.
Format (Caution! All data inside
the memory will be erased)
You can format the internal memory
when needed. (e.g. compatability
problem, etc.)
The procedures are as follow:
1. Turn on the unit.
2. Press ERASE, “DELETE” will flash
on the display.
3. Press and hold REC for 3 seconds,
“FORMAT” will flash on the display.
4. Press and hold ERASE, the
completed percentage will show on
the display, formatting is in process.
5. After the formatting is completed,
the remain time of the selected
memory will show on the display.
SP
ONE
AM
A
SP
ONE
AM
A
SP
DICT
A
SP
DICT
A
SP
DICT
A
SP
DICT
A
REMAIN
SP
DICT
A
Tip:
Cutting, inserting new segments
and adding appendix will only
update the recorded time length,
without changing recording time
and date.
RP5030 EN (B ver) 15/11/06 10:28 AM Page 19