Filter
Top Products
EN
5
Before You Begin
Power supply
This unit can be operated by 2
“AAA” batteries.
Installing Batteries (not
included)
1. Slide the battery compartment
door to the bottom and lift up the
door to open.
2. Insert 2 “AAA” batteries with
polarities matching indications.
3. Replace the battery compartment
door.
Refer to the battery level
indicator on display for
batteries level. Replace
with new batteries when
the indicator is empty.
Auto power shut down
The unit will be automatically turned
off if left idle for 3 minutes.
Using headphones and external
microphone
• When headphones are connected,
sound output from speaker will be
muted.
• When external microphone is
connected, no record can be made
from built-in microphone.
Starting up the unit
Press PLAY to turn on the unit to
start playback or recording.
Shutting down the unit
Press STOP to turn off the unit.
Keys lock
This feature avoids accidental key
activation during recording or
playback.
1. Slide the button upward ,
LOCKED will be flashed on display.
(LOCK icon will be shown)
2. Slide the button downward to
unlock the keys.
Tones
You can activate this
feature so that beep
sound can be heard
whenever you press on
any button except
during playback and
recording.
1. Press MENU button
repeatedly until
TONE shows on
display.
2. Press REVERSE or FORWARD to
set beep sound ON/ OFF.
3. Press MENU to confirm selection.
BEEP
BEEP
RP5030 EN (B ver) 15/11/06 10:28 AM Page 10