Filter
Top Products
Unit doesn’t turn on
• Check that batteries are properly
inserted and not exhausted.
• Make sure battery compartment
door is properly closed.
• Make sure LOCK function is not
activated.
Display keeps flashing when unit
is off
•You may not have set the time.
Refer to section on Time Setting.
Cannot record
• Make sure LOCK function is not
activated.
• Make sure memory is not full.
•You have recorded 99 files in one
folder. Try record in a new folder.
Cannot show recording date and
time during playback
•You may have not set the date and
time before recording. Refer to
section ‘Time Setting’.
No sound from speaker during
playback
• Make sure volume is not set to 0.
• Headphones should not be
connected.
Cannot edit
• Make sure LOCK function is not
activated.
Cannot activate the unit after
pressing on keys
• There may be software problems.
Remove the batteries to reset the
unit.
Recordable time becomes shorter
•You may have set the recording
quality to ‘High Quality’, refer to
section ‘Setting Recording
Quality’.
Cannot perform playback
• Make sure you have selected
folder with recorded messages.
• Make sure LOCK function is not
activated.
Cannot erase recorded file(s)
• Make sure you follow each step
under section “Erasing Selected
File” carefully.
Cannot stop recording when AVR
ON
• If AVR ON sensitivity is too high
(e.g. 8 - 10), recording may not be
stopped in noisy environment.
Cannot keep the saved setting
• If the batteries are removed, saved
settings may be removed.
EN
17
Troubleshooting Tips
RP5030 EN (B ver) 15/11/06 10:28 AM Page 22