Filter
Top Products
2 SpeedTouch™ Installation
E-SIT-CTC-20030702-0003 v4.0
9
2 SpeedTouch™ Installation
Connection methods The SpeedTouch™ supports the following connection methods:
• PPP (PPPoE or PPPoA)
• RFC1483 Bridged
Note PPPoE connectivity for Mac OS 8.6/9.x is only supported through an
external PPPoE client application. The PPPoE client application software
must be provided by your Service Provider.
You must select the appropriate service profile and the corresponding local setting
during the installation process. This information should be provided by your Service
Provider.
What you need from
your ISP
You might need a user account with an Internet Service Provider (ISP) for Internet
access. For this user account, it will provide you:
• A user name (logon ID)
• A password
Other information may be required, depending on the ISP’s specific requirements.
Installation The installation procedure to follow depends on the Operating system you are running.
In case your computer runs:
• An MS Windows Operating System
Proceed with “2.1 Installation for MS Windows Operating Systems” on page 10.
• A Mac Operating System
Proceed with “2.2 Installation for Mac Operating Systems” on page 18.