Chapter 1
Your SpeedTouch™
E-DOC-CTC-20050429-0098 v1.0
11
1.3.2 Access via CLI
Command Line
Interface (CLI)
You can access the Command Line Interface (CLI) via:
A Telnet session
This requires that TCP/IP connectivity exists between the host from which the
Telnet session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected PC must have an IP address in the same subnet.
Quote site commands (over FTP)
For more information, see “ Quote site command” on page 15.
For information on CLI commands, see the SpeedTouch™ CLI Reference Guide.