RCA VR5235 Microcassette Recorder User Manual


  Open as PDF
of 31
 
21
ENGLISH
Accessing Recorded File Information
While in stop mode, press and hold MENU to display recorded file information
such as, date of recording, time of recording, recording mode, and recording
quality.
Recording
1. While in stop mode, press REC•PAUSE to start recording. The red recording
indicator will illuminate. Recording time will be displayed once you begin
recording.
2. To pause recording, press REC•PAUSE once. The red recording indicator will
be flashing. Press again to resume recording.
3. To stop recording, press STOP.
AVR (Automatic Voice Recording)
This feature allows the player to sense sound and to record only when you are
speakingintothemicrophone.Whendictationstopsforaboutthreeseconds,
recording will pause and then start again automatically when you resume
dictation.
1. Select AVR ON in the Setting menu. Refer to Settings section for instructions
on how to select AVR ON.
2. Press REC•PAUSE to enter AVR mode.
3. Start dictation. Recording starts automatically.
4. Press STOP to end AVR recording.
Toadjustthesensitivity(Low/Middle/High)ofthemicrophone,press- Volume +
during AVR recording.
Recording
• AVRworksbetterfordictationapplicationsthanlectureor
conferencerecordingsasbackgroundnoisecancausesome
false triggers.
• Thefirstsyllableortwomaybelostwhenyoustartrecordingbecause
this ‘sound’ is used to turn on the AVR feature. It is a good practice to
makesome‘sounds’orsayashortwordtoactivatetheAVRbeforeyou
begin actual dictation.
 previous next