Renesas M16C/6N5 Network Card User Manual


 
M306NKT-EPB User’s Manual 5. Troubleshooting
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006 Page 99 of 104
(3) Errors Occur at Emulator Debugger Startup
Table 5.3 Checkpoints of errors at debugger startup
Error Checkpoint
ERROR 16224:
Target MCU is uncontrollable.
Execute the RESET command.
(1) Check that the NQPACK etc. mounted on the user system is soldered
properly.
(2) Check that the connector is installed properly to the user system.
(3) In memory expansion mode or microprocessor mode, check pins
RDY# and HOLD# are at “H” level.